A UK Air Accidents Investigation Branch report found that part of a main rotor damper fastener was missing from a Sikorsky S-92A after a passenger flight returned to Aberdeen on March 5, 2026. All 16 passengers and both crew members were uninjured. The AAIB published its report on November 12 and said investigators could not establish why the missing part failed.
Vibration increased on the return flight
The pilot noticed slight vibration as the rotors engaged and the helicopter taxied at Aberdeen. The vibration eased in cruise, then increased at the Andrew Platform helideck and on the flight back. After landing, engineers reviewed the helicopter’s health and usage monitoring data and ran a ground test. They shut down G-CIJC and inspected the main rotor hub instead of sending it out on its next flight.
The inspection found excessive movement in one main rotor damper, which helps control how the blades move relative to the hub. Part of the fastener that held the damper’s outer bearing was missing, although the assembly remained connected by its self-locking nut. Engineers replaced the damper, checked the hub for other defects and returned the helicopter to service.
What Sikorsky knew about similar cases
The AAIB says the manufacturer knew of four other cases involving a missing part of the same fastener, including one after the Aberdeen incident. The causes were not established in every case. Sikorsky’s qualification testing had shown that an S-92A could continue to fly and land with one damper inoperative. The report says both crews and the monitoring system can detect the associated vibration.
Sources: AAIB report AAIB-31557 (PDF) and the official investigation summary.
Archive: passengers boarding an Airbus H175 at Aberdeen Airport in February 2017. The image illustrates offshore helicopter operations at Aberdeen. Photo by Flerg via Wikimedia Commons, CC BY-SA 4.0. Full frame resized and converted to WebP. The resized image retains the licence.

